Capacity Tolerance

GB – CapacityTolerance

Compares the capacity declared on the current invoice to the capacity declared on the previous invoice and will allow for a tolerance if required.

Note: The Validator is unable to complete if there is not a previous bill

Validator Set Up

Variables

Variable	Description
Bill will pass validation if the Query Value is less than (£)	Enter a monitory figure, for example 50. The Validator will only fail if the value of the difference is above £50
Tolerance value %	Enter a percentage figure that you want the value to be within, for example enter 1 (for 1%)

Bill Entry Screen

Current bill

Previous bill

Failure Prompt

Total capacity within % of previous bill: FAILED - The name of the Validator

'tolerance=1.00' - Tolerance set in the Validator - 1%

'capUnits=400.00' - The value entered into Capacity kVA field - 400 (in the current bill)

'MinimumQueryValue=50.00' - The minimum amount the query needs to be (in £s) for the Validator to fail, ie £50

'upperlimit=202.00' - The amount of the kVA on the previous bill plus 1% (as set in the Validator) 200 + 2(1%) = 202.00

'capcost=200.00' - The value in the Capacity kVA field - 200 (in the previous bill)

'QueryValue=100.00' - The monitory value of the difference in the previous bill kVA and current bill kVA (current bill £200.00, previous bill £100, £200 - £100 = £100).

'lowerlimit=198.00 - The amount of the kVA on the previous bill minus 1% (as set in the Validator) 200 - 2 (1%) = 198.00