Introduction

The Energy Ratings Overview provides a table of data for all of the sites containing Energy Ratings information.

By default Energy Performance Certificate (EPC) or Display Energy Certificate (DEC) ratings can be captured, but new schemes can be added as required.

**Click here for a pre recorded training session for additional help and guidance - Recording your data for Energy Compliance

Opening the Energy Ratings Activity

Click on the Energy Ratings Overview Activity

Adding a New Scheme

A new scheme is added from the Site Editor.

Right click on any Site
Click Edit
Click on the Energy Ratings tab
Click on
Click on

Scheme Name - enter the name
Description - enter a short description
Click OK

This can now be used for any Site.

Adding a New Energy Rating

From the Energy Ratings Overview:

Select the Site in the Data Selector
Right click on the Site
Click Edit to show the New energy label pop up
To add new Energy Rating information select the icon

Rating Scheme - choose from the dropdown options available
- To add a new rating scheme, see below
Description - enter the description (this is recommended to be the top level A/B/C/D/E/F/G rating)
Energy Rating - enter the rating value (this will most likely be the more detailed numeric rating e.g. 86)
Rating Colour - this is the colour you want to associate with the rating that has been selected. There are several ways to add the colour:
- type in the colour, e.g. red, green, blue
- enter HTML colour code, e.g. #FFCC00, #639966
- click allows you to select a colour from the pallet or you can click to provide you with further colour options
Effective from - this is the date that the rating is effective from for the selected scheme on the Site
Expiry Date - this is the date that the rating is effective to for the selected scheme on the Site
Click OK

Viewing Energy Ratings

Energy Ratings can be viewed across all sites for a particular scheme within the Energy Ratings Overview Activity.

Click on Energy Ratings Overview

Highlight the Site(s) you want to display the ratings for

Tip: Click on one of the Sites in the Data Selector, then Control + A to highlight them all

To choose which scheme to view the ratings for across the selected Sites:

Choose the Scheme Name from the dropdown to return results

This will show all ratings that are captured against each site for the selected scheme applicable on the date that has been chosen

Working within the Activity

The Table

The table displays the following columns by default:

Site
Site Reference
Energy Rating Description
Effective From Date
Expiry Date (will display in red if out of date)
Rating

Adding / Deleting columns

Existing columns can be removed or additional columns added.

Right click on the header bar and select columns
Tick / Untick as required

Viewing Documents

Click at the end of the row to open up the documents window associated with the energy ratings

The applicable certificate document can be captured as the point of adding the rating so it can be easily found in the future.

Printing the Table

The displayed table can be printed or exported to Excel.

Click to print the table
Click to create an Excel spreadsheet

Editing a Rating

Right click on the Site > Edit
Navigate to the Energy Ratings tab of the Site Editor
Right click on the Scheme for the following options:

Edit ratings - this will allow individual ratings for the selected scheme to be edited

Documents - this will allow all the documents that have been captured for the scheme to be viewed, as well as added or removed

Add a new rating to this scheme - this will allow a new rating with new effective dates to be added for the selected scheme

Remove selected item - this will remove the scheme and all the ratings that have been captured for the Site. A warning prompt will be displayed for confirmation