TB - totalConsumptionTolZeroCheck.xml
Checks This validator should be set up for specific Accounts where you want to check zero consumption on this bill and/or previous bill. It is advised to set up at Account Level rather than Organisation.
*Similar to TB - tltalCosumptionTolYearZeroChecktotalCosumptionTolYearZeroCheck.xml, which checks the previous years bill.
...
Current Bill details
Failure Prompt
Explanation: - This example is where the Pass if this bill has consumption, and the previous bill has zero consumption is ticked none of the options have been ticked, and there is no consumption on this bill, but there is consumption om the previous bill
Total cons within % of previous Tenant Bill. PASS/FAIL on selected bill = zero criteria: FAILED
kWhLimit=010.00 - the 'Pass if cons difference%' figure in the Validator (last field) = 0 10 - 10 kWh
TolPcent=02.00 - the 'Tolerance' set in the Validator (first field) = 0 2 - 2%
LoLimit=3433.6 95994 - the consumption in the previous bill 3433.695994 kWh
bznz=0.00 - - 0 = not set in this validator, but if ticked, will pass if this bill has zero consumption and the previous bill has zero consumption
HiLimit=3435.653 34606 - the consumption in the previous bill - 3435.65334606 kWh
bzz=0.00 - 0 = not set in this validator, but if ticked, will pass if this bill and the previous bill both have zero consumption consumption
PrevCons=34.653 - consumption on the previous bill 34.653 kWh (therefore did not pass validation as the previous bill has consumption, it was not zero)
bnzz =10.00 - 1 0 = not set in this validator and , but if ticked, will pass if this bill has consumption, and the previous bill has zero consumption consumption
kWhDiff=433334.347 653 - the difference between this bills consumption and the previous bills, 4368 0 (this bill) - , 34.653653 (previous bill) = 433334.347 653
PresCons=4368 0 - consumption on this bill - 4368 kWh 0kWh
However, if the Validator was set to PASS if present bill = zero, previous bill non-zero (bznz), then it would have passed.
An example would be if you were not worried if an Account had zero consumption, even it if had consumption on the previous bill.
