...
Opening the Data Input Activity from the Estate Management Activity
If you are in the Estate Management Activity, you can move to the Data Input Activity and retain the Meter details.
- Click on the Meters & Channels Tab
- Highlight the Meter
- Click New Meter Reading
This will open the Data Input Activity and show the Meter you highlighted.
If you want to add more Meters, you will need to see the Data Selector.
- Double click on the ellipse (dots) on the left hand side to show the Data Selector
- Chose your preferred search type in the Data Selector
- Highlight the Sites, Meters or Channels that you want to add readings for
Alternatively, open the Data Input Activity separately
Opening the Data Input Activity
...
When you choose Sites, the right of the Activity will show any Sites that have Meters with Non-Periodic Channels.
...
- Using the Data Selector, you can select Sites, Meters or Channels using whichever search method you prefer
...
- .
- Click on the ellipse (dots) on the left hand side to show the Data Selector
- Click on the red Cross to remove the Search
- Use the Data Selector as normal
Searching using a Stored Search
A Stored Search can be created and used in the Data Input Activity. However, it is used in a slightly different way to most Activities:
- Open Data Input Activity
- Change the Data Selector to Stored Searches
- Select your Stored Search
- Highlight the Items in the Stored Search
Tip: to highlight all of them, click on any one in the Data Selector, then Control+A on the keyboard
- Change the Data Selector to Custom Selection
...
- Drag and drop the Items from the Saved Items to Search Steps and the Activity will update and you can now enter your meter readings
Entering meter readings
Once you have the Meters in the main part of the screen, you will be able to see the Site, Meter Number, Commodity etc. You can also see the previous Meter Reading, and previous Meter Reading date.
To add new readings:
- Double click into the line you want to add a reading for
- Change the reading date (if required)
- Change the reading time (if required)
- Enter the new reading
- Click return
- If the reading passes validation, a green tick will be displayed
If the reading fails validation, an exclamation mark will be displayed
Viewing the Validation Results
If the Reading fails Validation, you can view the reasons why it has failed.
- Right click on the line > line
- Click View Validation Results
This will show what the reading has passed and failed on
...
- Click OK to return to the Data Input Activity
- Amend the reading if necessary
Editing Options
- Right click on a row to see the options available
- View Validation Results- shows what the reading has failed on
- Clear Values - removes the values entered in the New Reading Date and New Reading fields
- Edit Site – takes you to the Site Editor screen
- Edit Meter – takes you to the Meter Editor screen
- Edit Channel – takes you to the Non Periodic Channel Editor screen where you can click Show data to see all of the readings entered for that Channel
Selecting/Deselecting Columns
...
- When you have entered all the readings, click
Note, you do not have to enter a reading for every line displayed. If you do not have a reading, it can be left blank.
Viewing Validation errors
All validator errors will show
- Click OK to save all the entered readings
- Or Cancel to go back to amend readings.
Showing Inactive Meters
Inactive meters can be added to the table.
...
Entering meter readings directly into the Channel
There will need needs to be a Non-periodic Channel set up underneath a Meter for you to be able to manual enter meter readings.
Note: there is no validation when entering meter readings directly into a Channel. It is recommended to use either the Data Input Activity to validate the readings entered.
...
- Open the Estate Management Activity
- Search for the Site or Meter/Channel and go to the Meters & Channels Tab
- Highlight the Meter and Non-Periodic Channel
- Click
HFD Viewer
- Click Actions > Add reading > At end
- Click OK
- Enter the date of the reading
- Click OK
This will update the Data Viewer with the date of the reading
- Double click into the newly created line
- Amend the date (if required)
- Amend the time (if required)
- Enter the meter reading in the Value field
- Click OK
- Click OK to close the popup to save the reading
...