Simple Tag vs Property Key

GB – SimpleTagvsPropertyKey

Compares the field (Tag) in the Bill against the defined Property Key

It will fail if figures are not the same (or within a tolerance if set in the Validator).

The Accounts need to have a Property Key set up with a value that the Bill Entry will compare to.

Variable	Description
Number of Tag on Bill Entry screen to be checked (eg 1028 for Elec Capacity)	Enter the Tag for the field in the Bill Entry screen that the Validator will check against. For example 577 for Rate 1 Electricity
Property Key that Bill Entry screen Tag must be with % of:	Enter the Property Key Name that will be checked
Tolerance Percentage for difference:	Enter the percentage tolerance, or enter 0 for no percentage

Bill Tag vs Property key validator: FAILED - name of the Validator

propertyValue=30.555 - the value in the Property Key

upperlLimit=30.555 - the value including any percentage

billValue=0.301 - the value in the Bill