A gap in the data is defined as a single missing or series of consecutive missing interval meter readings from a periodic channel.
For example:
Note, it is not limited to half-hourly only, if your data is received every 15 minutes, or 5 minutes, then the system will support this.
If data gaps are found for one of the strategies, then notifications will be raised that are visible in the Notification Tab.
If the strategy was configured to auto-fill all gaps, then the notification will still be raised, but marked as resolved, to provide visibility of what the system has done, providing a full audit.
Resolving Data GapsWhere the strategy was configured not to auto-fill all gaps for you, then these can be manually resolved using the "Resolve" functionality available. Highlight the applicable Data Gap Notification(s) in the list.
The graph at the top shows the periodic data for the channel linked to the notification selected. The red area shows where the Gap is.
Actions - Data GapUpdate Period Average SettingYou can change the number of Weeks used as a basis for calculating the data to use when filling the gap, select all the Notification records it should apply to then click Update. This will update the period to use when calculating the averaged data to fill the gap.
PreviewIf you want to see what the filled data will look like, click first. This will show you what the filled gap would look like for the Notification that has been selected in the list. The filled period is highlighted in green.
Fill
The Resolve Notifications pop up appears: A Note can be optionally entered if required and will be stored against the Notification.
The following confirmation popup will be displayed: Click OK Cancel
|